Aundrea McGarry

How to Replace Door Handles

The door handles of your home are an essential part of the decor. A new handle will elevate your home's decor and bring your decor up to date.

Over time, your knobs on your doors may begin to feel stiff or even break. These are signs it's time to replace the knobs. This guide will help you choose the best front door handle repair handle Replacement Door Handles for your home.

Door Knobs

Door handles add to the look of your home, while making it easier for people to open and close doors. They come in a variety of finishes, colors and styles to match your decor. If yours is beginning to show signs of wear or require an upgrade, you can change them in just a few simple steps.

You must locate the spindle, or shaft through which the knob is connected to the door. Some knobs have a tiny hole that you can insert an incredibly small screwdriver to loosen the set screws holding the knob in place. Some have a small slot, or hole, that you can use to press the spring-activated detent pin using a flathead. This pin releases the latch mechanism and lets you pull or push the knob.

Once you have the spindle, or shaft in your hand, remove the old knob and replace it. Make sure you align it properly and then verify that the latch is working properly before tightening your new set screws.

Once you've replaced the knob, hold the latch rod in position over the hole in the door and interlock it with the rod mechanism on the second knob. Make sure that the holes are lined up and then thread in the screws on the latch plate and tighten the screws.

Some homeowners opt for a brushed or smooth metal finish for their door handle repairs hardware, giving their home a sleek and contemporary look. It will complement their other furniture. Some prefer a rustic design that works well with farmhouse-style rooms. If you have members of your household with mobility limitations You may be interested in a rim lock or lever-style door knobs, which require less pressure to operate.

Other aspects are being considered more and more for the design of upvc door handle repairs handles. Accessibility and infection control are key considerations in the development of new designs for handles. For instance certain handles handle designs can be operated by a person's arm.

Latch

The latch that holds the handle of your door open will wear down over time. It is simple to replace the latch on your door handle. This will make a big difference in how it opens and closes.

Depending on what type of handle you use the latch can be a separate piece or an integral part of the knob. In either case, you'll need to follow the same process for removing and replacing. It's simple to take off the old latch, especially in the case of doors with a "magic" button. The button is located on the left side of the knob, this little pressure-slot is the one you need to press to pull the latch right out of the handle and out of the latching mechanism.

If your handle does not have this magic button the first step is to take off any cover plates that rest over the latch plate. These are usually circular or rectangular and can be removed by using a screwdriver in order to remove them off of the handle. Some have a small slot in them that you can slide your screwdriver, whereas others simply snap off.

Then, remove the machine screws that attach the latch and the plate to the door handle. It is important to keep the screws that are shorter and have a pointed tip in a safe place in order to reuse them in the future. Once the screws are removed you can remove the latch plate and mechanism out of the hole in the door and Replacement door Handles place it in a safe place.

Then you can begin to install the new latch. Install the latch plate into the upvc door handle repair near me hole and secure it using the hardware supplied. Make sure that the square pin on interior of the latch faces the latching mechanism of the handle and is aligned with the other holes for screws in the handle. Then, push the outside latch plate onto the handle and secure it using the screws provided.

Strike Plate

It is not uncommon to replace a door handle because it is loose or does not lock properly. This is often caused by incorrectly aligned parts in the latching mechanism, for example the strike plate being too small or shifted upwards or downwards on the doorjamb as time passes. This simple fix allows you to replace your old strike plate with a new, longer one that can provide greater security and will keep your door shut.

Apply some lipstick or other marking material on the bolt for the latch to determine if it's the strike plate. Close the door and attempt to latch it. If the mark is below the strike plate's hole, it means that the plate is too small and the door will not latch. If the mark is higher than the strike plate hole, it's likely that the strike plate has been moved up or down the doorjamb.

You may be able simply to screw the new strikeplate into the old one using the screws that come with it, based on your door. You may need to drill holes first and then chisel a bit of wood to ensure a secure fit. If this is the case, you must be careful not to chisel too hard or you'll cause damage to the integrity of your doorjamb.

You can also try installing a new strike plate that will give the lock a stronger hold on the door and requires more force to open it. Typically, it requires two longer screws that anchor the strike plate to the door frame. To accomplish this, you'll need to take off the existing strike plate, then drill and chisel out the wood to make room for the new one.

This hard-to find strike plate is made from solid brass and has a thick, heavy-duty. It's specifically designed to be used with antique rim locks. This kit includes wood screws and machine screws so you can choose the right hardware to suit your needs. Remember that wood screws have a pointed tip, and machine screws have a blunter tip.