Leonie Mariano

How to Replace a UPVC Door Replacement Lock

If your door lock is jammed or doesn't function as it should, you might need to replace it. It may sound complicated, but the process is easy and doesn't require a locksmith professional.

Few basic tools, some patience and a lot of love is all you need. Here's what you must do:

Measure the Door

If you're struggling to lock your uPVC door, or it won't close, then it could be the time to replace it. If you've recently moved, a tenant has left without returning keys, or your multipoint gear box is showing signs of wear and tear, it's easy to swap out the barrel of your lock for one that is new and provides an additional layer of security.

Before you purchase a new lock, it is necessary to gather some key measurements to ensure that the new lock fits properly and doesn't compromise your security at home. The most crucial of these is the backset. This is the distance that lies between the centre of your keyhole bore hole and the edge of your door. It's typically 2 3/8 or even 2 3/4 inches. You can measure the length using measuring tape, and write down the results.

You'll also have to know the faceplate width. This is the size of the part that covers the mechanism of the lock. If possible, purchase an alternate lock manufactured by the same manufacturer since they'll be made according to the same dimensions. If you can't find the name of the manufacturer or mark on the lock, you can measure the length of the cylinder. You can also verify this by placing a pencil over the keyhole and measuring from the top of the lock to the middle of the pencil mark on each side of the cylinder.

Once you have the dimensions you need, you can begin removing the old cylinder. Start by loosening the screw holding the handle in place with a Phillips-head driver. Then, loosen the screws that hold the handles' exterior and interior to one another. Once these screws are removed, you are able to remove the barrel screw located on the exterior handle and pull the cylinder out.

If the cylinder is stuck in the lock you can try WD-40 or another lubricant. It is crucial not to push it out. The forceful turning of the cylinder can damage the lock's internal gearbox. Consider upgrading to a lock that has anti-snap, antibump and anti-snap protection. This will help to make it more resistant to attacks from thieves.

Source the Lock

If you're replacing an old lock after a break-in or upgrading for better security, there are some things to keep in mind when sourcing your new door lock. To ensure quality and fit, make sure you buy the correct size cylinder and from a reputable manufacturer. You'll also require some essential tools to complete the job, including a screwdriver, tape measure and rubber mallet.

There are several signs your upvc lock is wearing out and must be replaced. The lock may have obvious damage, or the handle may be loose and doesn't fit properly. If the lock starts jamming or doesn't lock at all then it's time to consider the possibility of replacing it.

The correct installation of the lock is crucial once you've picked the correct lock. This will ensure that it locks and works correctly. Follow the manufacturer's directions to install the new multipoint lock mechanism onto the door panel made of upvc and attach the correct handles and faceplates. Test the mechanism by locking the door and then unlocking it from both the inside and outside. Once you've completed the project, it's time for a celebration.

It may seem difficult to change the lock on a upvc, but you can do it on your own without the help of a locksmith. It's simple to replace your lock if one is aware of the indicators and have the appropriate tools.

Keep in mind that just like any other moving component that a door lock made of upvc will benefit from some lubrication to keep it running smoothly. A few sprays or a little graphite powder can help prolong their lifespan by reducing excessive friction. Regular cleaning with a damp cloth and WD-40 will help in keeping your door lock mechanisms in tip top condition.

Take out the Cylinder

It may be time to replace lock upvc door the lock barrel in case you're experiencing issues with your upvc door. This is a straightforward DIY project that can be completed in just a few minutes and is a great method to ensure your home's security. This requires you to determine the brand of the lock to find the appropriate replacement locking mechanism for upvc doors.

A damaged door lock can be a major pain and also an extremely security risk. Locks on uPVC doors are susceptible to malfunction, which is why it's important that you maintain them regularly. Experts recommend that you replace your lock every seven years. If your lock is undergoing significant damage or you're not happy with its performance, it's certainly worth seeking out the help of an expert.

In most cases, a simple pin-based system, referred to as a euro cylinder is used to construct uPVC doors. They are simple to use and are not likely to break down, but can still be vulnerable. It is therefore recommended to replace your lock with a more modern lock that comes with anti-snap and anti-bump security to guard against burglaries.

The first step to change your upvc door locking mechanism replacement lock is to remove the handle and opening the old cylinder. This can be difficult as there are typically some screws hidden beneath the handles, so ensure you have a screwdriver handy. Next, you'll need to experiment with gently shifting the cylinder until it loosens. Once it does, you can remove it from its socket.

Once you have found a replacement that is suitable you can simply screw it in and reverse the removal process. Do not tighten the lock too much as this could cause the cylinder in the door to get stuck and stop working as it should. Test the uPVC replacement lock by opening it and closing it both from the inside and outside. You should now be able to lock and unlock it with your key! If not, ensure the screws are tightened and try again.

Install the Lock

Do some research to make sure that the lock you select is the right one for your door. You will be required to be aware of your faceplate and backset dimensions - the distance between the edge of the front patio door lock replacement and the center of the handle/cylinder - along with the lock type in order to make sure that the new lock is fitted correctly and does not compromise security.

Once you've finished that, it's time to begin installing the new lock. It is recommended to prop the door open or secure it so that it doesn't close during the process. First, loosen the screws that hold the handle in place by using a Phillips-head screwdriver. After they've been removed then you'll be able to pull the handle's outer and inner parts apart.

You can now begin to remove the old cylinder. This is something you'll want to do by unscrewing it from its barrel. Once you've removed your cylinder and the barrel, you can install the replacement lock for composite door lock, ensuring you follow the directions for your specific model. After the lock has been installed you can test it by shutting and opening the door from both the inside as well as the outside, then locking and unlocking it from the interior and testing it again.

There are a variety of reasons to consider to change the locks on your uPVC door. It might be that you've recently moved into the property and you don't have a lock key, or that the previous tenant didn't return the key or you may prefer a more secure lock. Whatever the reason, changing the lock cylinder is easy and shouldn't take more than five minutes.

No matter if your uPVC doors are multipoint or single-point locks, they all use the same mechanism. This means they can be susceptible to issues at times that could result in them not being able to close or getting stuck. These issues can be caused by weather conditions, wear and tear, or just everyday use. Most of these problems are easily fixed with a little maintenance or by contacting locksmiths.