Aundrea McGarry

Door Handle Replacement

It's worth replacing door handles if you aren't happy with the way they look or if they are difficult to use. Installing a new door handle is simple if you've got patience.

Modern door handles are equipped with cover plates that conceal the screws to give them a beautiful appearance. However, you'll need to attach them separately if your new handle does not already have them.

Removing the old Handle

Door handles are not only an important aesthetic addition to your home door handle repair near me, but they're vital for safety since they let you lock and unlock your door. However, over time, your door handle may lose its grip, appear loose, or appear old and worn. This is a sign that it's probably the time to replace your door handle.

If your door handle is becoming difficult to use, it may be time to replace it. This is an issue because it means you can not lock or unlock your door, which could pose an security risk to you and your family.

Another reason to replace your door handle is when it's damaged or broken. A damaged or broken door handle can be very dangerous, especially when your children or elderly family members are unable to open it and could get trapped inside. Fortunately, it's fairly simple to fix a damaged door handle by simply replacing the old one.

Most modern door handles are a standard size and so they will fit on any door. If you're not sure if your new door handle will fit, try removing the old one and measuring its housing holes. This will help you purchase the right size door handle.

It is the easiest method to remove the old door handle by taking it off from the door. This is typically done with the screw driver. However, some door handles have a cover plate that conceals the mounting screws, so you'll need to remove this cover plate to get access to the screws beneath. After you've removed the old handle, make a note of how the spindle is attached to ensure you are able to align it when you fit the new one.

Alternatively, you can remove your door handle repairs handle by unscrewing it from the latch mechanism. You can make use of a screwdriver to take off the door handle. But, you'll need to locate the small latch that is located on the edge cut piece. After you have removed the latch, take off the handle and the strike plate. Then remove the latch from the door's edge.

Remove the Strike Plate

You'll have to replace your latch plate when you replace the handle. This is the plate that is the one that holds the hole in which the latch of the door handle repair near me hooks when the door closes. The new handles will come with two latch plates: a rectangular and circular plate (see the diagram above which illustrates the components of the door handle). If you have an old rectangular latch plate, you can replace it with a circular one. This will allow the latch to hook onto the strike plate and make the handle easier to use.

The first step is to take off the screw that is holding the old latch plate. The screws are usually quite tight and require a bit of force to loosen them. If you can, it might be helpful to have another person assist with this part.

Once the screws are removed the latch will slide out of the door with ease. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This can sometimes free up the plate.

You can now move on to preparing the new door strike plate to be installed. Install the latch plate in the door jamb using the screws that were included with the new handles. Do not overtighten your screws as this can damage the strike plate.

If you are not sure whether the latch plate is in the proper position, close and open the door to check whether it latches and closes correctly. If it does not, you will need to adjust the strikeplate upwards or down, or forward or back until the door locks properly.

If the door is still moving or jiggles, you may have to enlarge your latch hole on the strike plate. This is more common on older doors. It could be caused by wear and tear, hinges that are too shallow, the wrong size latch, repair Door handle or damaged strike plate. If this is the situation, follow the same procedure as adjusting the strike plate, using the use of a metal file instead the hammer and chisel.

Removal of the Latch

The latch is the angled metal piece that slides through the hole in the inner edge of your door. When you turn the handle, it pushes the latch forward and allows you to open the door handle repair plate. It also catches the door's frame so that the door is closed. If your Repair Door Handle shakes when you close it, a new latch may be the only thing needed to fix the issue.

The screws that hold the door latch are difficult to see however, you can put a screwdriver in a small hole in the trim plate, and then pull the latch off. After you've removed the trim plate, it will be simple to take off the latch and the remaining bolts that hold the latch and spindle in the position.

If the latch cannot be easily removed using a paperclip or tool to take it off the handle mechanism. Insert the item in the recessed latch slot, and gently twist it or jiggle until the that the latch and handle are beginning to split. You may need repeat this process a few times before you are able to take the latch off.

It should be possible to slide the new latch into its slot with no issues after you've removed the old one. Make use of the new screws to attach the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot, aligned with the screw chambers.

Take note of the backset (the distance between the center of the large hole in the front of the door and the edge) prior to installing the new handle. Verify that the size of the latch of the new handle matches the measurement.

If you're replacing the handle or latch, or if your old lock cylinder is damaged, then you'll need a new one. If you're not changing locks the new latch should fit in the existing recess and work with your current keys. Make sure you select the latch with rectangular cover plates that match the handles you have.

Then remove the Cover Plate

You can replace your door handles with a modern rose and lever designs to improve the look of your house. You can buy complete sets that come with the appropriate escutcheons and privacy adjustor kits.

The first step to replace the door handle inside is to remove the cover plate or rose, which covers the screws and inner mechanism. Use a flathead to remove the plate. It may have a slot on one edge or be secured by pins.

When the cover plate is removed take off the screw that holds the interior handle in place, and then set it aside. You'll also want to remove the screws that are holding the latch and plates, which you can do by loosening them with a Philips screwdriver. Then, remove the inner plates and latch plate from the door and put them aside.

Some doors don't have this gap. If yours isn't allow for a handle, you'll have to drill a hole into the door. This is the same procedure for opening a locked door however, you'll have to be extra cautious not to damage the frame or door.

After the holes are drilled then you'll need to install new screws for the door knob. Be sure to purchase the same size as the old ones, so that you don't end up with the handle that is too tight or loose. It's also necessary to install the new strike rod and latch plate that aren't part of the majority of door handle sets.

If you're in search of a reliable replacement set of interior door handles look no further than the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received a plethora of five-star reviews from delighted customers. It's a great choice for replacing worn out or damaged interior door hardware on your Chevy.